Strong wood kitchen counters are natural items made of timber from trees approximately 120 years of ages. Wood is a living material and also the more wetness obtains, the a lot more the timber countertop will certainly increase. The wood we utilized in strong timber worktops has been previously kiln dried out to a moisture level of 6%, as well as it is consequently essential that the worktop is not subjected to a regularly high degree of moisture. Typically the humidity degree in cooking areas is approximately 50-70%.
The solid wood top need to be connected to the closet box using only wood screws as well as washers. It is not suggested in any way to adhesive the top on the closet box; the leading and also package increase and contract at different rates, therefore cracks might eventually appear, many probably on the cabinets' surface.
The proper means of mounting a strong timber top is utilizing metal dealings with along the closet box (see our website).
The metal mendings should be uniformly distributed throughout the size of the top, spaced at a 1' - 1.5' range from each other. Across the size, the top is generally taken care of to each metal support with 3 screws, one in the middle, one toward the front edge and also one towards the rear side. The supports must be perfectly leveled; otherwise stress can develop in the timber, leading to bending, cupping, or cracks.
We recommend pre-drilling the screw openings into the timber counter top, to avoid fractures and also divides. For the same factor, it is a great suggestion not to over tighten the screws. The completing will considerably reduce the extent of such activities, but will certainly not eliminate them completely. useful content Because of the panel's laminated framework, the lengthwise activities are irrelevant, so the installer needs to pay focus to the activities taking place throughout the panel's width. In order to stop the growth of internal stress, the openings in the steel mendings need to be elongated towards the motions (see our web page ).
When subjected to regular humidity levels - i.e. 50-60% - the worktop's size will certainly increase by 1/12"-1/ 24", but when exposed to a level of 80-90%, this measurement may broaden by up to 1/2" and even a lot more for some varieties. For that reason, when the back edge of the counter top is installed against a wall, the wall surface might restrict the top's all-natural movements, leading to undesirable tensions in the wood. To prevent this, you can enable a 1/4"-1/ 2" joint between the wall surface as well as the kitchen counter edge and also caulk it with a slim proposal of acid-free silicone.
Furthermore, you can firmly take care of the back side to the steel sustains underneath and also thus, enable the all-natural motions to happen at the expenditure of the opposite side.
In this situation, the openings in the metal correctings matching to the rear side will certainly be no larger than the screws diameter, while the openings matching to the center area as well as the front side will be lengthened.
For additional info concerning the setup of timber kitchen counters, bar tops as well as kitchen area islands, please see our website.